Tag Archives: 1100

Volkswagen RNS 510 Firmware Upgrade to version 1100 / 1102

NOTE: A new firmware version supercedes this one. See Volkswagen RNS 510 Firmware Upgrade to version 2660 / 2662 / 2664 / 2666 / 2668

Version 1100 Firmware for the Volkswagen RNS 510 has been released, the update upgrades the version to the B version and gives new features such as

  • Bluetooth audio support
  • AV output
  • Faster touchscreen response
  • New volume location at bottom of screen without any dimming
  • Bluetooth Audio Support
  • New Balance Fader

Units that can be upgraded include

  • 1T0 035 680 (1T0035680) from software version 0421, 0520, 1000, 800 and 900 to version 1100.
  • 1T0 035 680 A (1T0035680A) from software version 0421, 0520, 1000, 800 and 900 to version 1100.
  • 1T0 035 680 B (1T0035680B) from software version 0421, 0520, 1000, 800 and 900 to version 1100.
  • 7L6 035 680 (7L6035680) from software version 0522, 1002 and 1022 to version 1102.
  • 7L6 035 680 A (7L6035680A) from software version 0522, 1002 and 1022 to version 1102.
  • 7L6 035 680 B (7L6035680B) from software version 0522, 1002 and 1022 to version 1102.
  • 1Z0 035 680A (1Z0035680A)

After the process is complete you will have a B revision unit.

The firmware can be downloaded from here in a NRG format and should be burnt to DVD +RW (CDR is also ok) using Nero. Alternatively you can download the ISO version from here.

Warning! When this upgrade is performed it will delete all the music and require your maps to be reloaded (last addresses and home address are retained however as are other settings). There is also a remote chance of your ‘bricking’ your unit. The process will take around 60 minutes.

  1. Unlock and/or open the car
  2. Do not start the car
  3. Turn the RNS 510 on and insert the firmware CD/DVD into the drive
First stage of firmware upgrade loading
First stage of firmware upgrade loading
Second stage of firmware upgrade loading
Second stage of firmware upgrade loading
Unit will restart before the next stage
Unit will restart before the next stage
Unit after restart
Unit after restart
First confirmation screen
First confirmation screen
Second confirmation screen
Second confirmation screen
The process will quickly show 100% and move onto the next step
The process will quickly show 100% and move onto the next step
The actualy firmware upgrade will now commence after this screen
The actual firmware upgrade will now commence after this screen
Time remaining is shown at the base
Time remaining is shown at the base
Process is still going, once this step is finished the unit will change to the following screen
Process is still going, once this step is finished the unit will change to the following screen
Eject the CD to restart the system
Eject the CD to restart the system
Sound setup menu - new option for AV output
Sound setup menu - new option for AV output
New fader display
New fader display
New options for bluetooth audio and artist/title names.
New options for bluetooth audio and artist/title names.

Insert the map DVD and it will automatically start loading. If you try and eject it early you will get the following message.

Early ejection of the map dvd will give this error.
Early ejection of the map dvd will give this error.

Note: Setup now has to entered by coding using Vagcom\VCDS. See seperate guide for performing this.

Note: If you receive a clamp state error ‘a swl disk is detected but it is unvalid because of clamp state. please switch clamp state to hour mode and re insert disk’ this means you need to change the time format of the clock in the RNS 510 from 12 hour to 24 hour clock.