Category Archives: Firmware Updates

Volkswagen RNS 510 Firmware Upgrade to version 2700 / 2702 / 2704 / 2706 / 2708

Version 2700 / 2702/ 2704 / 2706 / 2708 Firmware for the Volkswagen RNS 510 and the Skoda Columbus has been released. So far it appears to be only bug fixes and the 2660’s new features remain

  • Voice Control (requires microphone – see Volkswagen RNS 510 Microphone Connection for voice control)
  • Speed Limit Display
  • Stability Improvements
  • Faster Startup (this has been improved on 2770)
  • Display OPS and RVC at the same time
  • SDHC 32 GB Support (HW04 and above)
  • Display Off on extras tab
  • Climatronic control if approriate climatronic fitted
  • Clock display if RNS 510 swtiched off (buggy)
  • Excluded roads (under route options)
  • GPS coordinates entry
  • Additional adjustments for video
  • Larger RVC screen with transparent menus at the side

Further details on the features can be found on the following page: Volkswagen RNS 510 Firmware version 2660 / 2662 / 2664 / 2666 / 2668 new features

Units that can be upgraded include (still being compiled may not be 100%)

  • 1T0 035 680 C (1T0035680 C) from software version 1000, 800,  900, 1100 and 2660 to version 2700.
  • 7L6 035 680 C (7L6035680C) from software version 1002,  1022, 1102 and 2664 to version 2700.
  • 3T0 035 680 A (3T0035680A) to version 2704.
  • 7F0 035 680 (7F0035680) to version 2700.
  • 7E0 035 680 (7E0035680) to version 2700.
  • Further to follow as the firmware is loaded.
  • USA Firmware has yet to be released

Warning! This upgrade WILL delete your music and/or maps if you have a firmware version PRIOR to version 1100/1102. Units with a firmware version of 1100/1102 will not have music and maps deleted.

Warning! There is a remote chance of you ‘bricking’ the unit, this is a fraction of a percent but it could happen! The process takes around 60 minutes.’

Warning! There are a small number of users where the RNS 510 does not know where it is after it’s been powered on, details of the previous location are kept in the unit but at this stage there is no pattern to this problem.

Warning! Users with cars MY07 and earlier may experience power drain issues after the upgrade. See the post “Upgrading 2nd generation radios (RCD 300, RCD 500) to 3rd generation (RCD 210, RCD 310, RNS 310, RCD 510) power drain issue” for more details.

Warning! Users with the Skoda UHV bluetooth 1Z0 035 729 B (1Z0035729B) may want to delay upgrading the firmware, there is an issue with the RNS 510 no longer displaying the phone book and/or the call details but signal strength etc are visible for some phones. My HTC Diamond for example worked fine before the update but only partially afterwards however my Iphone 3G worked fine before and after. This is not a problem with the 1Z0 035 729 D (1Z0035729D) Skoda UHV bluetooth kit. The MFD functions as per normal with phone book and last calls listed correctly. Android 2.1 phones work fine with the update.

Note! Test/Setup Mode. The firmware can allow access to enter test/setup mode without Vagcom/VCDS access see Accessing the Setup Menu on the RNS 510 head units with firmware later than 1100. The procedure for entering the test/setup mode for those with Vagcom/VCDS is slightly different as well. To enter the test/setup mode when the RNS 510 is operating press and hold the setup button, keep holding it when the radio menu appears and shortly after the test menu appears . I had to reboot my unit after coding it but it may be possible a power cycle is enough.

Note! Failure (Gateway Error 202) You can downgrade back to 1100 by inserting the 1100 firmware and rebooting the RNS 510 (Setup + eject + info).

Download Firmware Upgrade

Volkswagen RNS 510 Firmware Download Repository

Version Information from VERSION.TXT

--------------------------------------------
Software Loading CD for CP2 based units
(c) CONTINENTAL Wetzlar

CdTreeBuilder version 3.06 is used.
--------------------------------------------
#CD:P 0 0 4 . 8 4 0 . 3 0 1
#CD:P 0 0 4 . 8 4 0 . 3 0 1
#DATE:2009-11-19

#Project: VWRNS
#Author: RoNe
#Steckbrief: C_EU_9.242_t450 C6

#CommentStart:
This is a SWL CD for VW delivery.

#CommentEnd:

#Integrationphase: Delivery cw45/09 C6-samples
#VwSwPartNumber:1T0035680C/1T0035680C/7L6035680C/3T0035680A/7F0035680/7E0035680
#VwSwIndex:2700/2706/2702/2708/2704
#AppsBuild:C_EU_9.242_t450 C6
#CRC16:dc42

Firmware loading steps from start to finish (2660 but the process is the same)

Volkswagen Media Device Interface (MDI) Firmware Upgrade 0090 KW33-2009

Firmware Changes

Version 0090 – production (from week) KW33/2009
(any MDI’s produced or fitted in the factory from week 33 2009 onwards should have this version fitted out of the factory)

See Volkswagen Media Device Interface (MDI) Firmware Upgrades for the latest version.

General Notes

See Volkswagen Media Device Interface (MDI) Firmware Upgrades for general information on the firmware updates including restrictions, file formats and connectivity.

Firmware is for units with a software version of 0090 or greater, if firmware is unable to be updated or you have already flashed this version it will not load.

  • Download the firmware from one of the links below.
  • Extract the file using your preferred ZIP or RAR tool.
  • Copy the file mdi.bin.enc in the root (top) level of a USB flash drive and insert this into the USB cable.
  • Turn the headunit on or start the car and the update will proceed. If the MDI is selected the status will be displayed.
  • After around 1 minute the update will complete and the USB flash drive may be removed.

VW MDI 0090 KW33-2009 Firmware – RAR

VW MDI 0090 KW33-2009 Firmware – ZIP

Possible Error Messages during the update process

  • Update with older version is not possible
    • The file on the USB flash drive is older than the software version on the MDI.
  • Update on the same version is not possible
    • The file on the USB flash drive is the same as the software version on the MDI.
  • Update file is corrupted or damaged
    • Re download the file and start again
  • Multiple update files found
    • There are multiple update files in the root of the USB flash drive, delete the older versions and start again.
  • Update was terminated
    • An error has occurred in the update, start again.

Volkswagen RNS 510 Firmware version 2680 / 2682 / 2684 / 2686 / 2688 new features

New features after the RNS 510 firmware upgrade from 1100 / 1102 to 2680 / 2682 / 2684 / 2686 / 2688

For problems and warnings with the firmware upgrade see  Volkswagen RNS 510 Firmware Upgrade to version 2680 / 2682 / 2684 / 2686 / 2688

  • Voice Control (requires microphone – see Volkswagen RNS 510 Microphone Connection for voice control)
  • Speed Limit Display
  • Male and Female Voices
  • Stability Improvements
  • Faster Operation
  • Faster Startup
  • Display OPS and RVC at the same time
  • SDHC 32 GB Support (HW04 and above)
  • Display Off on extras tab
  • Climatronic control if appropriate climatronic fitted
  • Clock display if RNS 510 switched off (fixed – was buggy on 2660 / 2662 / 2664 / 2666 / 2668)
  • Excluded roads (under route options)
  • GPS coordinates entry
  • Improved route calculation
  • Additional adjustments for video
  • Larger RVC screen with transparent menus at the side
  • Navigation destination input can be deactivated when vehicle is in motion – see Volkswagen RNS 510 navigation warning when vehicle is in motion

Volkswagen RNS 510 Firmware Upgrade to version 2680 / 2682 / 2684 / 2686 / 2688

Version 2680 / 2682/ 2684/ 2686 / 2688 Firmware for the Volkswagen RNS 510 and the Skoda Columbus has been released.

  • Voice Control (requires microphone – see Volkswagen RNS 510 Microphone Connection for voice control)
  • Speed Limit Display
  • Male and Female Voices
  • Stability Improvements
  • Faster Operation
  • Faster Startup
  • Display OPS and RVC at the same time
  • SDHC 32 GB Support (HW04 and above)
  • Display Off on extras tab
  • Climatronic control if appropriate climatronic fitted
  • Clock display if RNS 510 switched off (fixed – was buggy on 2660 / 2662 / 2664 / 2666 / 2668)
  • Excluded roads (under route options)
  • GPS coordinates entry
  • Improved route calculation
  • Additional adjustments for video
  • Larger RVC screen with transparent menus at the side

Further new features and more details can be found on the following page: Volkswagen RNS 510 Firmware version 2680 / 2682 / 2684 / 2686 / 2688 new features

Units that can be upgraded include (still being compiled may not be 100%)

  • 1T0 035 680 (1T0035680) from software version 0421, 0520, 1000, 800,  900 and 1100 to version 2660.
  • 1T0 035 680 A (1T0035680A) from software version 0421, 0520, 1000, 800,  900 and 1100 to version 2660.
  • 1T0 035 680 B (1T0035680B) from software version 0421, 0520, 1000, 800,  900 and 1100 to version 2660.
  • 7L6 035 680 (7L6035680) from software version 522, 1002,  1022 and 1102 to version 2664.
  • 7L6 035 680 A (7L6035680A) from software version 522, 1002,  1022 and 1102 to version 2664.
  • 7L6 035 680 B (7L6035680B) from software version 0522, 1002,  1022 and 1102 to version 2664.
  • 1Z0 035 680 A (1Z0035680A) from software version 0524, 1004, 1024 and 904 to version 2664.
    1Z0 035 680 A (1Z0035680A) becomes 3T0 035 680 B (3T0035680B) after upgrade.
  • 1Z0 035 680 B (1Z0035680B) from software version 0524, 1004, 1024 and 1104 to version 2664.
    1Z0 035 680 B (1Z0035680B) becomes 3T0 035 680 B (3T0035680B) after upgrade.
  • Skoda units – see instructions below for keeping steering wheel buttons operational
  • Seat units – No, the Hardware ID shows up as Skoda but if this is changed to VW the firmware will load and the Hardware ID can be changed back to Seat. There are no hardware definaitions for the Seat on the upgrade media.
  • USA Firmware has yet to be released

Warning! This upgrade WILL delete your music and most older versions of  maps. This is a factory CD which means the unit is reset to factory defaults, this is denoted by the extension (#CD:P 0 0 4 . 8 1 4 . 9 0 1), the 901 indicates factory CD. An update has a .301 extension.

Warning! There is a remote chance of you ‘bricking’ the unit, this is a fraction of a percent but it could happen! The process takes around 60 minutes.’

Warning! There are a small number of users where the RNS 510 does not know where it is after it’s been powered on, details of the previous location are kept in the unit but at this stage there is no pattern to this problem.

Warning! Users with cars MY07 and earlier may experience power drain issues after the upgrade. See the post “Upgrading 2nd generation radios (RCD 300, RCD 500) to 3rd generation (RCD 210, RCD 310, RNS 310, RCD 510) power drain issue” for more details.

Warning! Users with the Skoda UHV bluetooth 1Z0 035 729 B (1Z0035729B) may want to delay upgrading the firmware, there is an issue with the RNS 510 no longer displaying the phone book and/or the call details but signal strength etc are visible for some phones. My HTC Diamond for example worked fine before the update but only partially afterwards however my Iphone 3G worked fine before and after. This is not a problem with the 1Z0 035 729 D (1Z0035729D) Skoda UHV bluetooth kit. The MFD functions as per normal with phone book and last calls listed correctly.

Note! Skoda owners

  1. Extract files PQTABLE and SKTABLE from image (use magiciso or ultraiso). Files can be found from path: \VUCI\B101\RNSMIDEC\PROG
  2. Switch the filenames by just renaming SKTABLE to PQTABLE and vice versa
  3. Overwrite the renamed files back to image and save the image. Burn this image to DVD or CD.
  4. Load or reload the Firmware to your RNS-510 using the steps below.
  5. Voilá… buttons are back!

Note! Test/Setup Mode. The firmware can allow access to enter test/setup mode without Vagcom/VCDS access see Accessing the Setup Menu on the RNS 510 head units with firmware later than 1100. The procedure for entering the test/setup mode for those with Vagcom/VCDS is slightly different as well. To enter the test/setup mode when the RNS 510 is operating press and hold the setup button, keep holding it when the radio menu appears and shortly after the test menu appears . I had to reboot my unit after coding it but it may be possible a power cycle is enough.

Note! Failure (Gateway Error 202) You can downgrade back to 1100 by inserting the 1100 firmware and rebooting the RNS 510 (Setup + eject + info).

Note! Reboot the unit twice when the upgrade has completed.

Note! Coding has to be reset using Vagcom/VCDS as the unit is set to factory defaults.

Note! Unit language will be in German on startup, insert the map DVD and go to the setup menu and change the language.

Download Firmware Upgrade

Volkswagen RNS 510 Firmware Download Repository

Version Information from VERSION.TXT

--------------------------------------------
Software Loading CD for CP2 based units
(c) CONTINENTAL Wetzlar

CdTreeBuilder version 3.06 is used.
--------------------------------------------

#CD:P 0 0 4 . 8 1 4 . 9 0 1
#DATE:2009-11-03

#Project: VWRNS
#Author: KPK
#Steckbrief: C_EU_9.242_t400 C4A/C6

#CommentStart:
This is a SWL CD for VW delivery.

#CommentEnd:

#Integrationphase: Delivery cw45/09 C4A/C6-samples
#VwSwPartNumber:1T0035680C/1T0035680C/7L6035680C/3T0035680A/7F0035680/7E0035680
#VwSwIndex:2680/2686/2682/2688/2684
#AppsBuild:C_EU_9.242_t400 C4A/C6

#CRC16:bdf7

Firmware loading steps from start to finish (these are for version 2660 but the process is the same)

Volkswagen RNS 510 Firmware Upgrade to version 1200 / 1202 / 1204 / 1206 / 1208

Version 1200 / 1202 / 1204 / 1206 / 1208 Firmware for the Volkswagen RNS 510 and the Skoda Columbus has been released.

  • Support for SDHC cards up to 32GB
  • Point of interest import from SD cards

Warning! This upgrade MAY delete your music and/or maps if you have a firmware version PRIOR to version 1100/1102. Units with a firmware version of 1100/1102 should not not have music and maps deleted.

Warning! There is a remote chance of you ‘bricking’ the unit, this is a fraction of a percent but it could happen! The process takes around 60 minutes.’

Warning! Users with cars MY07 and earlier may experience power drain issues after the upgrade. See the post “Upgrading 2nd generation radios (RCD 300, RCD 500) to 3rd generation (RCD 210, RCD 310, RNS 310, RCD 510) power drain issue” for more details.

Note! Test/Setup Mode. The firmware can allow access to enter test/setup mode without Vagcom/VCDS access see Accessing the Setup Menu on the RNS 510 head units with firmware later than 1100. The procedure for entering the test/setup mode for those with Vagcom/VCDS is slightly different as well. To enter the test/setup mode when the RNS 510 is operating press and hold the setup button, keep holding it when the radio menu appears and shortly after the test menu appears . I had to reboot my unit after coding it but it may be possible a power cycle is enough.

Note! Failure (Gateway Error 202) You can downgrade back to 1100 by inserting the 1100 firmware and rebooting the RNS 510 (Setup + eject + info).

Download Firmware Upgrade

Volkswagen RNS 510 Firmware Download Repository

Version Information from VERSION.TXT

--------------------------------------------
Software Loading CD for CP2 based units
(c) CONTINENTAL Wetzlar

CdTreeBuilder version 3.06 is used.
--------------------------------------------

#CD:P 0 0 4 . 7 6 4 . 2 0 1
#DATE:2009-06-25

#Project: VWRNS
#Author: RoNe
#Steckbrief: C_EU_7.112_t1014 C4A/C5C/C6

#CommentStart:
This is a SWL CD for VW delivery.

#CommentEnd:

#Integrationphase: Delivery cw22/09 C4A/C5C/C6-samples
#VwSwPartNumber:1T0035680B/3C0035680C/7L6035680B 
#VwSwIndex:1200/1202
#AppsBuild:C_EU_7.112_t1014 C4A/C5C/C6

Volkswagen RNS 510 Firmware version 2660 / 2662 / 2664 / 2666 / 2668 new features

New features after the RNS 510 firmware upgrade from 1100 / 1102 to 2660 / 2662 / 2664 / 2666 / 2668

vw_rns_510_with_firmware_2662This firmware is shipping now on headunits from the factory. See photo to the right.

For problems and warnings with the firmware upgrade see  Volkswagen RNS 510 Firmware Upgrade to version 2660 / 2662 / 2664 / 2666 / 2668

  • Voice Control (requires microphone – see Volkswagen RNS 510 Microphone Connection for voice control)
  • Speed Limit Display
  • Stability Improvements
  • Faster Startup
  • Display OPS and RVC at the same time
  • SDHC 32 GB Support (HW04 and above)
  • Display Off on extras tab
  • Climatronic control if appropriate climatronic fitted
  • Clock display if RNS 510 switched off (buggy)
  • Excluded roads (under route options)
  • GPS coordinates entry
  • Additional adjustments for video
  • Larger RVC screen with transparent menus at the side
  • Navigation destination input can be deactivated when vehicle is in motion – see Volkswagen RNS 510 navigation warning when vehicle is in motion

Volkswagen RNS 510 Firmware Upgrade to version 2660 / 2662 / 2664 / 2666 / 2668

Version 2660 / 2662/ 2664/ 2666 / 2668 Firmware for the Volkswagen RNS 510 and the Skoda Columbus has been released and gives new features such as

  • Voice Control (requires microphone – see Volkswagen RNS 510 Microphone Connection for voice control)
  • Speed Limit Display
  • Stability Improvements
  • Faster Startup
  • Display OPS and RVC at the same time
  • SDHC 32 GB Support (HW04 and above)
  • Display Off on extras tab
  • Climatronic control if approriate climatronic fitted
  • Clock display if RNS 510 swtiched off (buggy)
  • Excluded roads (under route options)
  • GPS coordinates entry
  • Additional adjustments for video
  • Larger RVC screen with transparent menus at the side

Further new features and more details can be found on the following page: Volkswagen RNS 510 Firmware version 2660 / 2662 / 2664 / 2666 / 2668 new features

Units that can be upgraded include (still being compiled may not be 100%)

  • 1T0 035 680 (1T0035680) from software version 0421, 0520, 1000, 800,  900 and 1100 to version 2660.
  • 1T0 035 680 A (1T0035680A) from software version 0421, 0520, 1000, 800,  900 and 1100 to version 2660.
  • 1T0 035 680 B (1T0035680B) from software version 0421, 0520, 1000, 800,  900 and 1100 to version 2660.
  • 7L6 035 680 (7L6035680) from software version 522, 1002,  1022 and 1102 to version 2664.
  • 7L6 035 680 A (7L6035680A) from software version 522, 1002,  1022 and 1102 to version 2664.
  • 7L6 035 680 B (7L6035680B) from software version 0522, 1002,  1022 and 1102 to version 2664.
  • 1Z0 035 680 A (1Z0035680A) from software version 0524, 1004, 1024 and 904 to version 2664.
    1Z0 035 680 A (1Z0035680A) becomes 3T0 035 680 B (3T0035680B) after upgrade.
  • 1Z0 035 680 B (1Z0035680B) from software version 0524, 1004, 1024 and 1104 to version 2664.
    1Z0 035 680 B (1Z0035680B) becomes 3T0 035 680 B (3T0035680B) after upgrade.
  • Skoda units – see instructions below for keeping steering wheel buttons operational
  • Seat units – No, the Hardware ID shows up as Skoda but if this is changed to VW the firmware will load and the Hardware ID can be changed back to Seat. There are no hardware definaitions for the Seat on the upgrade media.
  • USA Firmware has yet to be released

Warning! This upgrade WILL delete your music and/or maps if you have a firmware version PRIOR to version 1100/1102. Units with a firmware version of 1100/1102 will not have music and maps deleted.

Warning! There is a remote chance of you ‘bricking’ the unit, this is a fraction of a percent but it could happen! The process takes around 60 minutes.’

Warning! There are a small number of users where the RNS 510 does not know where it is after it’s been powered on, details of the previous location are kept in the unit but at this stage there is no pattern to this problem.

Warning! Users with cars MY07 and earlier may experience power drain issues after the upgrade. See the post “Upgrading 2nd generation radios (RCD 300, RCD 500) to 3rd generation (RCD 210, RCD 310, RNS 310, RCD 510) power drain issue” for more details.

Warning! Users with the Skoda UHV bluetooth 1Z0 035 729 B (1Z0035729B) may want to delay upgrading the firmware, there is an issue with the RNS 510 no longer displaying the phone book and/or the call details but signal strength etc are visible for some phones. My HTC Diamond for example worked fine before the update but only partially afterwards however my Iphone 3G worked fine before and after. This is not a problem with the 1Z0 035 729 D (1Z0035729D) Skoda UHV bluetooth kit. The MFD functions as per normal with phone book and last calls listed correctly.

Note! Skoda owners (thanks to Ted)

  1. Extract files PQTABLE and SKTABLE from image (use magiciso or ultraiso). Files can be found from path: \VUCI\B101\RNSMIDEC\PROG
  2. Switch the filenames by just renaming SKTABLE to PQTABLE and vice versa
  3. Overwrite the renamed files back to image and save the image. Burn this image to DVD or CD.
  4. Load or reload the Firmware to your RNS-510 using the steps below.
  5. Voilá… buttons are back!

Note! Test/Setup Mode. The firmware can allow access to enter test/setup mode without Vagcom/VCDS access see Accessing the Setup Menu on the RNS 510 head units with firmware later than 1100. The procedure for entering the test/setup mode for those with Vagcom/VCDS is slightly different as well. To enter the test/setup mode when the RNS 510 is operating press and hold the setup button, keep holding it when the radio menu appears and shortly after the test menu appears . I had to reboot my unit after coding it but it may be possible a power cycle is enough.

Note! Failure (Gateway Error 202) You can downgrade back to 1100 by inserting the 1100 firmware and rebooting the RNS 510 (Setup + eject + info).

Download Firmware Upgrade

Volkswagen RNS 510 Firmware Download Repository

Version Information from VERSION.TXT

--------------------------------------------
Software Loading CD for CP2 based units
(c) CONTINENTAL Wetzlar

CdTreeBuilder version 3.06 is used.
--------------------------------------------

#CD:P 0 0 4 . 7 5 4 . 3 0 1
#DATE:2009-06-11

#Project: VWRNS
#Author: RoNe
#Steckbrief: C_EU_9.242_t300 C3/C4A/C5C/C6

#CommentStart:
This is a SWL CD for VW delivery.

#CommentEnd:

#Integrationphase: Delivery cw45/09 C3/C4A/C5C/C6-samples
#VwSwPartNumber:1T0035680C/1T0035680C/7L6035680C/3T0035680A/7F0035680/7E0035680
#VwSwIndex:2660/2666/2662/2668/2664
#AppsBuild:C_EU_9.242_t300 C3/C4A/C5C/C6

#CRC16:8b76

Firmware loading steps from start to finish