Enabling static cornering lights in the Volkswagen Golf Mark V with factory fitted fog lights

Enabling static cornering lights in the Volkswagen Golf Mark V (Mark VI is covered here) only requires a few changes via Vagcom/VCDS.

The cornering function works when your headlights are activated (either manually or via the RLS) under the following conditions

  • The indicator is activated either by holding it down or clicking it into position (not when comfort indicating)
  • The car is in P, N, D, S or Manual (not when in reverse)
  • The steering wheel is turned 85° from the straight ahead position.
  • The speed is under 50kph (once the car drops below this speed the light will activate and once it goes above this speed the light will fade off)

The fog light on the side of the car that the wheel is turned towards will light up, depending on the speed of the steering wheel the light will either fade in slowly or turn on instantly but the light will always fade out slowly.

You will need a 30 Byte Central Electronics Convenience Module (CECM) which are fitted to MY08’s models onwards.

Open Controller 9 and select Coding – 07

volkswagen_golf_mark_v_enabling_cornering_lights_01

Click the Long Coding Helper, do not copy down the coding seen as these are specific to each car and it’s options/setup.

volkswagen_golf_mark_v_enabling_cornering_lights_02

Select Byte 23 and bit 2, 3 and 4 need to be selected and the type of light chosen (Turn Lights via Fog Lights).

volkswagen_golf_mark_v_enabling_cornering_lights_03

Once it looks like this select “exit”

volkswagen_golf_mark_v_enabling_cornering_lights_04

Select “Do It!” to save the coding.

volkswagen_golf_mark_v_enabling_cornering_lights_05

If the code is accepted select “OK”

volkswagen_golf_mark_v_enabling_cornering_lights_06

Close the controller to finish.

volkswagen_golf_mark_v_enabling_cornering_lights_07

To test the cornering light function turn the headlights on and turn the wheel left or right, the engine doesn’t have to be turned on. My boys were less excited about the cornering lights then I was.

volkswagen_golf_mark_v_enabling_cornering_lights_08

15 thoughts on “Enabling static cornering lights in the Volkswagen Golf Mark V with factory fitted fog lights”

  1. 2 things:
    – lights are up when wheel is 90° turned
    – for cornering the lights should be change in stead of fog lights with only “02B” sign to cornering & fog lights with also “00K” sign. mirror inside and also position of the bulp are different (more front). it is the law issue

    ps. sorry for my english

    1. Thanks I’ll look into the cornering lamp some more however the Mark 6 uses fog lights for cornering. The wheel in my testing doesn’t need to go anywhere near 90° for the lights to activate.

  2. Enabling cornering lights in the Volkswagen Golf Mark VI with factory fitted fog lights.Can anyone give me
    a link how can I do it?Thanks

  3. Does every 30byte cecm can do this or it have to be 30byte highend? Can it be 30byte medium or just 30byte highend?

  4. This page shows up on the first page of Google when searching for how to enable the static cornering fog lights on a VW Golf MK6 yet there is no information relating to the MK6 as this page is for the VW Golf MK5. You say “Mark VI is covered in it’s own guide” – can anyone actually find the guide for the Golf 6 on this site? It doesn’t appear to exist! :/

Leave a Reply to Leic Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.