Latvia’s ghost lane?

Volkswagen Golf Accessories – Transport Equipment

 

Bicycle holder

acc_te_bicycle_holder_6q0071128a

 

 

 

 

(illustrated with roof bars)

For the serious cyclist. Aerodynamically shaped plastic section with frame holder in matt chromed steel. Lockable. Easy to handle and easy to fit. Weight empty: approx. 3.2kg. City Crash tested.

  • Part no. 6Q0 071 128 A

How the City Crash test works

The transport system is fitted to the vehicle and loaded with an appropriate weight. A typical rear-end collision in urban traffic at approximately 30 km/h is simulated by the application of horizontal acceleration and of forces acting against the direction of travel. To pass the test, the transport system must not become detached from the vehicle

Technical information

Only in conjunction with roof bars and supporting rods with C-slot or rectangular section 20 x 30. 

Suitable for bicycles with tubular frame up to 80mm diameter and tyre width up to 55mm.

 

Bicycle holder for tailgate

acc_te_bicycle_holder_tailgate_1k0071104

 

 

 

 

Matches the lines of the vehicle visually. Practical and quick to fit. Carries a maximum of two bicycles. Made from anodised aluminium sections, with an anti-theft locking device. Pre-assembled, therefore especially easy to attach. Weight: 6.8kg. Carrying capacity: 30kg.

  • Part no. 1K0 071 104

Technical information

  • Not suitable for vehicles with roof spoiler.
  • Not suitable for Golf GTI.

 

Bobsy G0 plus

acc_te_bobsy_g0_00v019900c

 

 

 

 

Being a rear-facing only child seat, the practical Bobsy G0 plus is applicable to all Volkswagen models fitted with three-point seat belts as standard. The infant is secured by means of the integrated harness belts, while a deep bucket and height-adjustable headrest offer the very best protection and support for small babies. Featuring an ingenious curved carry-handle, it enables babies to be placed in and taken out easily. It also features a softly padded, washable cover and a sunshield to protect against direct sunshine. Suitable for children up to about fifteen months old or weighing up to about 13kg. Please note, the front passenger airbag must be deactivated when fitted to the front passenger seat.

  • Part no. 00V 019 900 C

 

Bobsy G1 ISOFIX DUO plus

acc_te_bobsy_g1_00v019909b

 

 

 

 

All of the tests in the last few years have indicated that ISOFIX child seats are currently the safest systems for small passengers. The G1 ISOFIX DUO plus guarantees maximum levels of comfort, safety and support, being fastened into place with special standard mountings permanently fixed to the body of your car. As a practical feature, the G1 ISOFIX DUO plus, with its latching clips folded down, can also be used in cars where the ISOFIX system is not fitted. For maximum comfort, shoulder straps are easily adjustable for height, while the seat bucket can be fixed in three different positions. Suitable for children from eight months to about four years (9-18kg).

  • Part no. 00V 019 909 B

 

Bobsy G3 plus

acc_te_bobsy_g3_00v019906a

 

 

 

 

When the regular belt is still too big – or the passenger still too small, the G3 plus is the natural choice. It fills out the seat space so that the standard three-point seat belt can be properly strapped around the child. The seat adjusts in width to suit your child’s hip size and features supportive, upholstered side wings. The height of the sleep support can also be adjusted and tilted to match your vehicles seat back, ensuring your child stays comfortable even on longer journeys. The sleep support can also be removed. Covers are removable and washable. The G3 plus is fastened in place by means of the standard three-point seat belt. Suitable for children from four to twelve years (15-36kg).

  • Part no. 00V 019 906 A

 

Kayak holder

acc_te_kayak_holder_1k0071127

 

 

 

 

(similar to above image – illustrated with roof bars)

Specially developed for transporting one-man kayaks weighing up to 25kg. Net weight: 1.6kg.

  • Part no. 1K0 071 127

Technical information

  • For fitting onto roof bars/supports with T-slot section.
  • Plastic with rubber pads.
  • For the safe transport of one kayak.

Contents: 4 parts per set

 

Load protector

acc_te_load_protector_1k0017221

 

 

 

 

Reduce the risk of impact from your luggage under heavy braking. The strong, black powder coated steel tubular frame with wire mesh partition, separates the luggage and passenger areas and easily fits behind the rear seats with no need for tools. Once installed, the load protector does not interfere with the operation of airbags or the luggage compartment cover.

  • Part no. 1K0 017 221

 

Luggage net

acc_te_luggage_net_1k0065110

 

 

 

 

Make sure everything stays in its place. Helps prevent your load from slipping and sliding. The black tear-proof net is easily attached by four fastening hooks to the standard securing eyes that are fitted in the luggage space.

  • Part no. 1K0 065 110

 

Roof bar set

acc_te_roof_bar_1k0071126

 

 

 

 

The base roof bar set for all add-ons, whether ski and snowboard holder, bicycle holder, or the practical roof-top container. Made from aerodynamically shaped aluminium section with plastic supporting feet and cover caps. Mechanism is made from coated aluminium steel plate. With theft inhibiting locking system. Weight: approx. 5.5kg. City Crash tested.

  • Part no. 1K0 071 126

How the City Crash test works

The transport system is fitted to the vehicle and loaded with an appropriate weight. A typical rear-end collision in urban traffic at approximately 30 km/h is simulated by the application of horizontal acceleration and of forces acting against the direction of travel. To pass the test, the transport system must not become detached from the vehicle.

Technical information

  • Support section: T-slot

 

Ski and snowboard holder

acc_te_ski_snowboard_1t0071129

 

 

 

 

(illustrated with roof bars)

Carries up to six pairs of skis or up to four snowboards securely and conveniently. Practical telescopic pull-out feature makes loading and unloading easy. Lockable. Made of anodised aluminium section. Maximum support width: 600mm. Weight: 4.5kg. Carrying capacity: 36kg. TÜV approved in accordance with DIN 75 302.

  • Part no. 1T0 071 129

Technical information

  • Support section: T-slot

 

Ski sack

acc_te_ski_sack_00v061202

 

 

 

 

(similar to above image)

For the easy transport of up to four pairs of skis up to 190cm in length, including ski poles. Protects the skis against damage from other items of luggage in the vehicle or the sports and luggage container. It features an integrated belt that can be slotted into the seatbelt sockets. Length: approx. 200cm. Colour: black.

  • Part no. 00V 061 202

Also available

Storage bag for ski sack

When the ski sack is not in use, it can be stored inside this useful bag. It attaches to the interior of the vehicle using a handy Velcro pad.

  • Part no. 00V 061 201

 

Sports and luggage container

acc_te_sports_container_000071175

 

 

 

 

(illustrated with roof bars)

Stow extra baggage in this strong, beautifully shaped roof-top container. It has a highly practical, modern aerodynamic design made from high quality plastic with a high grade steel look. It attaches quickly and easily to the roof bars. The lockable box can be opened from either side, with an extra large opening angle for easy loading. Takes up to six pairs of skis or four snowboards (max. length 180cm). Outside dimensions: 190cm x 90cm x 38cm. Weight: approx. 25kg. Capacity: 450 litres. Maximum load: 75kg. City Crash tested.

  • Part no. 000 071 175

Also available

Extension kit

For transporting skis and snowboards in the sports and luggage container.

  • Part no. 000 071 275

How the City Crash test works

The transport system is fitted to the vehicle and loaded with an appropriate weight. A typical rear-end collision in urban traffic at approximately 30 km/h is simulated by the application of horizontal acceleration and of forces acting against the direction of travel. To pass the test, the transport system must not become detached from the vehicle.

 

Storage tray

acc_te_storage_tray_1k0061178a

 

 

 

 

This handy anthracite coloured storage tray is divided into five sections to give you additional storage space, so your items are readily accessible. There’s even a purpose made space for your first aid kit. No need to drill extra holes or fit extra bolts. Suitable for both 3 door and 5 door models.

  • Part no. 1K0 061 178 A

 

Surfboard holder

acc_te_surfboard_holder_445071127

 

 

 

 

The convenient way to carry up to two surfboards. Includes two mast holders and two tightening straps. Fits quickly and easily to the roof bars.

  • Part no. 445 071 127

 

Towbar – detachable

acc_te_towbar_detachable_1k0092155a

 

 

 

 

Both stable and strong. When not in use it can be safely stored inside the vehicle. Supplied with fitting kit and instructions. Electrical installation kit must be ordered separately.

  • Part no. 1K0 092 155 A 

Technical information

Suitable for Golf V, Golf GTI 2004 model year onwards, Golf Plus 2005 model year onwards and Cross Golf 2007 model year onwards.

Refer to vehicle documents or manual for permissible trailer or towbar loads.

  • D value (kN): 9,8
  • EC No. e1*94/20*1346
  • Manufacturer: Oris
  • Manufacturer type: E 392
  • Permitted drawbar load (kg): 75

Also required

Electrical installation kit, 13-pin

Safe system matched to controls of standard vehicle.

  • Part no. 1K0 055 204 G

2 comments to Volkswagen Golf Accessories – Transport Equipment

  • antonio joao abreu

    Im in North of Portugal,and for my VW GOLG PLUS 19TDI, Im looking for The base roof bar set like I saw in the picture,ths crash city alluminiuum. Whre can I get this?
    Tanks

  • Lucas

    Hi I really wont’so buy Ski and snowboard holder !!!!! where can I get this ? Lucas Scotland.

    (illustrated with roof bars)

    Carries up to six pairs of skis or up to four snowboards securely and conveniently. Practical telescopic pull-out feature makes loading and unloading easy. Lockable. Made of anodised aluminium section. Maximum support width: 600mm. Weight: 4.5kg. Carrying capacity: 36kg. TÜV approved in accordance with DIN 75 302.

    Part no. 1T0 071 129

Leave a Reply