Latvia’s ghost lane?

Volkswagen Golf Mark V & VI GTI, R32 and Bluemotion Wheel Alignment Specifications

Suits PR numbers: 2UA, 2UC, G02, G05, G07, 2UC, 2UB, G08, G11, G09, G04/2UC

These specifications apply to all engines.

The ride heights shown in the table refer to
dimension -a-.

Standard running gearSports running gear except 18"Sports running gear with 18" wheelsHeavy-duty running gearSports running gear GTISports running gear GTI US versionSports running gear R32BlueMotion
PR numbers2UA2UCG02, G05, G07, 2UC2UBG08G11G09G04/2UC
Front axle
Total toe (without load)10' +/- 10'10' +/- 10'10' +/- 10'10' +/- 10'10' +/- 10'10' +/- 10'10' +/- 10'10' +/- 10'
Camber (in straight-ahead
position)
-30' +/- 30'-41' +/- 30'-41' +/- 30'-14' +/- 30'-44' +/- 30'-30' +/- 30'-43' +/- 30'-41' +/- 30'
Maximum permissible
difference between sides
max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'
Toe-out on turns 1) at 20° left
and right lock
1°38' +/- 20'1°40' +/- 20'1°40' +/- 20'1°38' +/- 20'1°22' +/- 20'1°38' +/- 20'1°20' +/- 20'1°40' +/- 20'
Caster7° 34' +/- 30'7° 47' +/- 30'7° 47' +/- 30'7° 17' +/- 30'7° 47' +/- 30'7° 34' +/- 30'7° 47' +/- 30'7° 47' +/- 30'
Maximum permissible
difference between sides
max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'
Ride height382 +/- 10 mm367 +/- 10 mm367 +/- 10 mm402 +/- 10 mm360 +/- 10 mm382 +/- 10 mm362 +/- 10 mm367 +/- 10 mm
Rear Axle
Camber-1° 20' +/- 30'-1° 20' +/- 30'-1° 45' +/- 30'-1° 20' +/- 30'-1° 45' +/- 30'-1° 20' +/- 30'-1° 45' +/- 30'-1° 20' +/- 30'
Maximum permissible
difference between sides
max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'max. 30'
Total toe (At specified camber)+10' +/- 12,5'+10' +/- 12,5'+10' +/- 12,5'+10' +/- 12,5'+10' +/- 12,5'+10' +/- 12,5'+10' +/- 12,5'+10' +/- 12,5'
Maximum permissible deviation from direction of travelmax. 20'max. 20'max. 20'max. 20'max. 20'max. 20'max. 20'max. 20'
Ride height380 +/- 10 mm365 +/- 10 mm365 +/- 10 mm400 +/- 10 mm365 +/- 10 mm380 +/- 10 mm360 +/- 10 mm365 +/- 10 mm

1) Toe-out on turns can be displayed as a negative value on the wheel alignment computer, depending on the manufacturer.

Mark VI specifications differ with +/- 7mm for ride height

 

 

 

Leave a Reply