Volkswagen RNS 510 / Skoda Columbus navigation units may display the following warning when attempting to enter navigation destinations via the keyboard and/or when attempting to enter navigation destinations via speech and require the “I am aware” box to be pressed to continue.
Operating the device while
the vehicle is in motion
distracts from driving and
can be dangerous.
I am aware.
This can be turned off using Vagcom/VCDS easily by opening Controller 37 – Nagivation and click on Coding – 07
Click on Long Coding Helper
Click on Byte 7 and either Bit 2 and/or Bit 3 will be currently checked
Uncheck the boxes and save the changes to remove the speed warning.
Hi friend,
for me not work…
thanks
Me too not work. On my Skoda SuperbII Byte 7 and Bit/3 are uncheck standardy.
[...] destination input can be deactivated when vehicle is in motion – see Volkswagen RNS 510 navigation warning when vehicle is in motion #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; [...]
You can also VAG-COM ?
VCDS,for me not work
You can do this encoding with VAS ?
I have tried it but it dosnt work!
It no longer works with version 2680 onwards.
I found this interface that will unlock the Nav Adress in motion
http://www.venturatechnology.com.mx/products.asp?product=VT-VWNAVLINK-01
VT-VWNAVLINK-01 – VW RNS 510 MFD3 Video In Motion TV Free CAN-Bus Interface Module
Volkswagen Seat Skoda RNS-510 Plug And Play Videon In Motion Interface with USB input for feature updates stay curent
Unlock Features
Front DVD In Motion
TV Tuner In Motion
A/V Inputs In Motion
Nav Adress Input In Motion
Compatible Model
2009-2010 Golf V
2009-2010 Jetta
2010 Tiguan
2009-2010 Eos
2009-2010 Lupo
2009-2010 Passat
2009-2010 Phaeton
2010 Touareg
2009-2010 Touran
2010 Tiguan
2010 CC
2010 GLI
2010 GTI
Following any code change to the “37-Navigation” controller it will likely be necessary to reset the RNS-510. After exiting the controller, depress all three of the following buttons on the RNS-510 until the screen blanks: “” in the upper left and the “Day/Night” in the upper right.
This will reset the RNS-510 and allow the changes you’ve made to the controller to take effect.
Oops…html coding caused a problem with my description of the buttons…
The buttons to be pressed are the right and left arrow buttons in the upper left of the RNS-510 and the day/night button in the upper right.
You will have to hold the buttons for about 10 – 20 seconds
Is this possible with the firmware V. 2760 ?
I got RNS 510 c version SW 2680…has anyone found solution for video in motion without buying “Video In Motion CAN-Bus Interface Module”?!
Yes Marko. I can program the radio without requiring any modules to be added. It can’t be done with VagCom but I have SW that can accomplish this. If you are in Tri-State area I can do it for you
Frankie
Ahhh.. I always wondered why it just dissapeared on me, the warning that is. After I coded the RNS510 to play dvd’s it must have disabled the warning also. NICE
Frankie
Frankie, how did you code the RNS510 to play DVDs in motion? Using VAG-COM only or using the approx. $1000 Motordiag cable/software?
Thank you!
I actually do it hard code with the motordiag cable or I have a activator cd that I wrote with help from a friend. You just pop in the cd and VIM is enabled
Frankie
Frankie, any chance you can make an ISO of the cd available?
[...] via VCDS thru module 37 (Navigation). Follow this guide and you'll be able to 'fix' this problem Volkswagen RNS 510 navigation warning when vehicle is in motion | my-gti.com 2008 GOLF .:R32 5DR DBPE DSG SUNROOF "MYR-032" 2010 POLO 77TSI 5DR FLASH RED DSG MDI [...]