1. Aerial Connector
DAB aerial input connection, optional
or
SDARS aerial input connection for vehicles for USA and Canada
2. Multi-pin connector 1, 8-pin, for loudspeaker outputs

2 – Front right loudspeaker, positive
3 – Front left loudspeaker, positive
4 – Rear left loudspeaker, positive
5 – Rear right loudspeaker, negative
6 – Front right loudspeaker, negative
7 – Front left loudspeaker, negative
8 – Rear left loudspeaker, negative
5. Multi-pin connector 4, 12-pin, for CD changer control and CD audio input signals
1 – AUX signal input, left
2 – AUX signal earth
3 – CD changer, audio signal earth
4 – CD changer, voltage supply, positive, terminal 30, contact continuous load greater than 1 A, temporary peak load 5 A
5 – Not assigned
6 – CD changer, DATA OUT
7 – AUX signal input, right
8 – CD changer, left audio channel, CD/L
9 – CD changer, right audio channel, CD/R
10 – CD changer, control line, switched positive
11 – CD changer, DATA IN
12 – CD changer, CLOCK (internal check protocol for data flow monitoring)
6. Multi-pin connector 5, audio and video, 26-pin
(this will only be fitted to models fitted to vehicles with RVC factory fitted or ordered through spare parts with the RVC input option)
1 – Reserved for Debug RX protocol
2 – Reserved for Debug TX protocol
3 – Not assigned
4 – Video signal input, RGBS, negative (ground)
5 – Video signal output LF, Right (Audio use 17 for ground)
6 – Ground Sync input
(Internal universal preparation for mobile telephone, mobile telephone detection)
7 – Video signal output, vertical and horizontal synchronisation(Internal universal preparation for mobile telephone, cradle and button evaluation)
8 – Video signal ouput, green
(Internal universal preparation for mobile telephone, cradle, aerial diagnosis)
9 – Video signal input, RGBS, negative (ground)
10 – Video signal input LF, right (Audio use 24 for ground)
11 – Video signal input, screening earth
12 – Video signal input, vertical and horizontal synchronisation
13 – Video signal input, green
14 – Not assigned
15 – Not assigned
16 – Not assigned
17 – Video signal output, LF, negative (ground)
18 – Video signal output LF, Left (Audio use 17 for ground)
19 – Video signal output, RGBS, negative (ground)
(Internal universal preparation for mobile telephone, cradle, negative)
20 – Video signal output, Blue
(Internal universal preparation for mobile telephone, switched terminal 30)
21 – Video signal output, Red
22 – Video signal input, LF, negative
23 – Video signal input, LF, left (Audio use 24 for ground)
24 – Video signal input, RGBS, negative (ground)
25 – Video signal input, blue
26 – Video signal input, red
7. Aerial Connector
AM/FM aerial input connection
8. Aerial Connector
FM 2 aerial input connection
I have RCD510, but there is no connector No 6… This is US or EU version??
[…] Connections for Bolero Thanks for the reply So it looks like: Volkswagen RCD 510 pin assignments | my-gti.com (click on diagrams to make bigger) (p.s. -are you a fan of Scrubs, by any chance […]
I’m not sure what the part number is etc. but how would I go about purchasing the MDI kit for my car?
I see my car has only got the aux-in unlike the American models which came with the MDI kit for the iPod.
[…] out and see the back of it and see if you have the version with RVC socket provided… See here: Volkswagen RCD 510 pin assignments | my-gti.com Reply With Quote + Reply to […]
i have rcd 510 with connector no.6 but do not know what DAB areial i need Part no. would help Thanks
3C8057190 RVC (Reverse Camera Capable)no.6
3C8057195
3C8057195 A (DAB Compatible)
Hello.
Anybody knows if there is an adapter og plug available to connect the rvc to a zenec nc2010 radio ??
Or just a spare flug to make connections self ???
best regards Lars
Hi, do you know if this stereo support iPod interface? And siruis satelital radio?
[…] Multi-Pin […]
[…] Volkswagen RCD 510 pin assignments | my-gti.com Reply With Quote « Previous Thread | Next Thread […]
[…] 77: Telephone "Cannot be reached". So last night I downloaded the pinouts for the RCD510 quadlock connector and bluetooth. Turns out when I had removed the housing from the bluetooth connector to route the […]
Is it possible to get RCA line out by connecting harness to multipin connector 3 pin 2,3,8
and at the same time have VW sound amp
I want to connect a active subwoofer
Patrick
Patrick, Pins 2,3 and 8 are for the telephone only. If you connected a subwoofer to these, you would only amplify a telephone conversation.
Thanks Tim
Please tell me how do the connecting with a sub amp to rca510 with original amplifier
Patrick
Can I connect a gps in box and dvd in entry 6 of the RCD510?
[…] Volkswagen RCD 510 pin assignments […]
hi guys i bought a rcd 510 model 3C8057195 for in my mk v golf
the question now is that i don’t think that my cables are te same is there some linker ?
Dimitri
does the parking sensors go in this any where?
Hi all, I bought RCD510 instead of RCD210 but the aerial connectors aren’t the same. Please, do you know if there’s a adapter between them or I have to adapt in manual way?
How to connect a reverse camera on RCD 510 model 3C8057195 golf 6 2010?
Klima and Park sensor are instaled, also.
Thank’s