Latvia’s ghost lane?

Volkswagen / Skoda Bluetooth Voice Commands

Operation of the bluetooth voice operation mode for the Harman/Becker bluetooth system fitted to Volkswagen / Skoda / Seat and some Audi models is straightforward but may require coding by your dealer or Vagcom/VCDS.

Models that have voice control include

1Z0 035 729 A (1Z0035729A) = 1T0 035 729 A (1Z0035729A) = 5P0 035 729 A (5P0035729A)
1Z0 035 729 A (1Z0035729A) = 1T0 035 729 A (1Z0035729A) = 5P0 035 729 A (5P0035729A)
1Z0 035 729 A (1Z0035729A) = 1T0 035 729 A (1T0035729A) = 5P0 035 729 A (5P00035729A)
1Z0 035 729 A (1Z0035729A) = 1T0 035 729 A (1T0035729A) = 5P0 035 729 A (5P0035729A)

If you have a full height MFD operation of the phone can be controlled through that interface including access to the phone book. The RNS 510 ads to this by allowing you to search the phonebook of the phone easily, store names and numbers locally and start and end calls.

Pressing the star button (formally mute) on the Multi-functions steering wheel will mute the audio source at the time (except navigation instructions) and a tone will be heard at which time commands can be spoken to the unit.

List of possible commands
Say “Help” after the tone and the bluetooth unit will speak a list of commands.

Dial number by speaking.

  • Say “Dial Number” after the tone and say each digit, you may group the digits by pausing and the digits will be repeated back. If there is anerror say “Back” and that group of digits will be deleted and you may continue on. Once the digital have been confirmed correctly say “Dial” andthe bluetooth unit will respond with “The number is being dialed”. Saying “Cancel” at any point up until dialling will exit the bluetooth voice operation mode.

Redialling

  • Say “Redial” after the tone and the bluetooth unit will respond with “The number is being dialed”.

PhoneBook Operation

  • The voice phonebook is a seperate phonebook that is stored in the bluetooth unit seperately to your handset. The bluetooth unit has a capacity of 50 Names and Numbers.

Storing numbers in phonebook

  • Say “Store Name” after the tone and follow the instructions given by the bluetooth system. You will say the name twice before saying the number.

Playback of phonebook

  • Say “Phonebook” after the tone and the bluetooth system will play back the enteries in the phonebook in the order stored.

Dialing phonebook

  • Say “Name” after the tone and the bluetooth system will respond with “Say the name”. Respond with the name and the bluetooth unit will confirm theentry, if the entry is correct say “Dial” and the bluetooth system will respond with “The number is being dialed”

6 comments to Volkswagen / Skoda Bluetooth Voice Commands

  • Spydaboy

    Hi you guys,
    just swapped the rsap module on my 2010 sciroco with part number 1Z0035729E a skoda bluetooth unit. It was an easy hardware swap. The unit came pre programmed for Multi functinal steering wheel and White dot.
    However, I had to take the car back to the dealers who typed in the code 0000422. This allowed me to pair my iPhone with the mfd display between the clocks BUT I cannot get the phone function or any recognition of the phone on the RNS510!!!
    Does anyone know how to resolve this for me
    cheers

  • Figeto

    Your code is wrong. The right code for English language is 0013022.

  • Shawn

    I have the RCD 510 in my 2010 Tiguan and I want to get the phone option displayed in the MFD. Do I need to use a Vagcom…if so does anyone have the code or instructions?

  • Valentin Chialda

    At dialing phonebook:
    I found that you can even say “Call JACK” for example, after the tone and the bluetooth unit will confirm the name stored as “JACK”. To call it, you must press the voice command button again and the bluetooth system will respond with “The number is being dialed”. Be carreful, between “call” and the name you must wait one second or a little less. That’s working on a Skoda Octavia MY2008.

  • Walid

    Hi. I have installed harman Becker unit on rcd 510. Everything is working except speed dial. I can see the option but am unable to select it in order to setup it up. What do I need to do?

  • Dpet

    Hello,

    I wonder if someone could help. I have a Passat CC with rSAP modul (3C8 035 730) and RNS510. I wanted to have a normal hands free Bluetooth instead of rSAP, I have read in many posts that a “1Z0 035 729 A” with Bluetooth antenna will fit in this car so I have bought one, the first surprise that is does not fit in the polystyrene case, but that is not the problem. The problem is that I have chnaged the modul, and when I push the phone button on the RNS 510 it’s just mute, and on the MFD the phone menu has disappeared, when I fit back the rSAP modul everything is fine, on the RNS510 the phone menu works fine, and on the MFD the phone menu has reappeared.
    Did I bought a wrong modul? Or it must be installed?
    Could anyone help?
    Thank you in advance

Leave a Reply