Latvia’s ghost lane?

Drivers Front Door Trim - Removal and Installation

Removal
–   Switch off ignition.
–   Using a removal wedge -3409-, lever upper part of door handle recess -1- upwards out of mountings in door.
–   Depending on vehicle equipment, disconnect wiring harnesses from upper part of door handle recess.
–   Remove the two bolts -2- in area of door handle recess (1.5 Nm).
–   Remove bolt -3- and the three bolts -4- (2 Nm).
–   Using removal pliers -3392-, release bottom section of door trim from mountings.
–   Using removal pliers -3392-, release sides of door trim from mountings.
–   Pull door trim upwards vertically out of window slot.
–   If vehicle is equipped with a radio system, disconnect wiring harness from loudspeaker.
–   Disconnect wiring harness of door trim from door control unit.
–   Detach Bowden cable -5- from interior door handle mechanism -6-.
–   Remove bolt -7- (2 Nm) and lever triangular mirror cover -8- out of fasteners using wedge -3409-.
–   If vehicle is equipped with a radio system, disconnect loudspeaker wiring harness from cover.
drivers_front_door_trim_N70-10051Removal
  • Switch off ignition.
  • Using a removal wedge -3409-, lever upper part of door handle recess -1- upwards out of mountings in door.
  • Depending on vehicle equipment, disconnect wiring harnesses from upper part of door handle recess
  • Remove the two bolts -2- in area of door handle recess (1.5 Nm).
  • Remove bolt -3- and the three bolts -4- (2 Nm).
  • Using removal pliers -3392-, release bottom section of door trim from mountings.
  • Using removal pliers -3392-, release sides of door trim from mountings
  • Pull door trim upwards vertically out of window slot.
  • If vehicle is equipped with a radio system, disconnect wiring harness from loudspeaker.
  • Disconnect wiring harness of door trim from door control unit.
  • Detach Bowden cable -5- from interior door handle mechanism -6-.
  • Remove bolt -7- (2 Nm) and lever triangular mirror cover -8- out of fasteners using wedge -3409-.
  • If vehicle is equipped with a radio system, disconnect loudspeaker wiring harness from cover.
Installation
  • Installation is carried out in reverse order of removal.

1 comment to Drivers Front Door Trim – Removal and Installation

Leave a Reply